Parker Industrial Hose site map  |  parker.com
search
 
 
Hose Selector
Parker/Competitor
Product Search
CrimpSource
Find a Distributor
How to Order
 

Applications

• Beer, liquids, milk, non-fatty and non-oily foods, potable water, sanitary products, wine
• In-plant and tank transfer
• Delivery, transport

Series SS200 is a discharge hose designed to handle beer, non-fatty and non-oily foods, liquids and potable water in brewery and winery transfer applications. The hose is manufactured using polished stainless steel mandrels for an ultra-smooth tube that will not impart taste or odor, and is resistant to bacteria and microbes. The EPDM cover is resistant to abrasion, mild chemicals and ozone.

NOTES:
• Do not use in applications where a static charge may develop unless externally grounded.
• Capped ends available upon request.

Tube: White chlorobutyl
Reinforcement: Multiple textile plies
Cover: Orange EPDM; wrapped finish
Temp. Range: -40°F to +225°F (-40°C to +107°C)
Brand Method: Orange text on purple stripe
Brand Example: PARKER SERIES SS200 BREWERS HOSE MEETS FDA/3-A/USDA/PMO REQUIREMENTS (3-A LOGO) 350 PSI WP MADE IN USA
Design Factor: 4:1
Industry Standards: FDA, PMO, USDA, 3-A
Vacuum: Not recommended
Packaging: Coils

 
 
Part No. ID
(in)
ID
(mm)
Reinf.
Plies
OD
(in)
OD
(mm)
Approx.
Wt. (lbs/ft)
Approx.
Wt. (kg/ft)
Max.
Rec.
WP (psi)
Perm
Cplg
Rec *
Std
Pack
Qty (ft)
Stock
Status
**
SS200-1500 1-1/2 38.1 4 2.375 60.3 1.33 0.6 350 * 100 Y
SS200-2000 2 50.8 6 3 76.2 1.91 0.87 350 * 100 N
SS200-2500 2-1/2 63.5 6 3.5 88.9 2.32 1.05 350 * 100 N
SS200-3000 3 76.2 6 4.125 104.8 3.05 1.38 350 * 100 N
SS200-4000 4 101.6 6 5.125 130.2 3.87 1.76 350 * 100 N

Table Notes 
* Couplings: Refer to CrimpSource® at www.safehose.com for coupling recommendations and crimp specifications.
** Stock: “Y” indicates stocked item; “N” indicates non-stocked item. Stock status subject to change. Contact Parker Customer Service.









Warning: Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to NAHAD Industrial Hose Assembly Guidelines.